Lexmark MS310 Series User Manual

Incorrect margins on prints
ABCD
ABCD
ABCD
Action Yes No
Step 1
a Move the width and length guides in the tray to the correct
positions for the paper size loaded.
b Resend the print job.
Are the margins correct?
The problem is
solved.
Go to step 2.
Step 2
From the Paper menu, check if the paper size setting matches the
paper loaded in the tray. To access the Paper menu, do either of
the following:
• If the printer is on a network, then open a Web browser and
type the printer IP address in the address field. Then, navigate
to Settings > Paper Menu.
Note: If you do not know the IP address of the printer, then
print a network setup page and locate the IP address in the
TCP/IP section.
• If the printer is connected to a computer by a USB or parallel
cable, then open the Local Printer Settings Utility for Windows
or the Printer Settings for Macintosh.
Does the paper size setting match the paper loaded in the tray?
Go to step 3. Do one or more of
the following:
• Change the
paper size
setting to match
the paper loaded
in the tray.
• Change the
paper loaded in
the tray to match
the paper size
setting.
Step 3
a Depending on your operating system, specify the paper size
from Printing Preferences or from the Print dialog.
b Resend the print job.
Are the margins correct?
The problem is
solved.
Contact customer
support.
Troubleshooting 162

Lexmark MS310 Series Specifications

General

Print Technology	Monochrome Laser
Processor Speed	800 MHz
Monthly Duty Cycle	Up to 50, 000 pages
Recommended Monthly Page Volume	500 - 2, 500 pages
Connectivity	USB 2.0, Ethernet
First Page Out Time	As fast as 6.5 seconds
Print Resolution	1200 x 1200 dpi
Memory	128 MB
Duplex Printing	Standard
Input Capacity	250 sheets
Output Capacity	150 pages
Media Types Supported	Plain paper, envelopes, card stock, labels
Media Sizes	Letter, Legal, Executive, Statement, Oficio, A4, A5, A6, B5 (JIS), B6 (JIS), Envelope (No. 10, Monarch, DL, C5)
Operating Systems Supported	Windows, macOS, Linux
Dimensions	399 mm