Lexmark MS310 Series User Manual

Jammed pages are not reprinted
Actions Yes No
a From the Print Recovery menu, set Jam Recovery to Auto or
On. To access the Print Recovery menu, try one or more of the
following:
• If the printer is on a network, then open a Web browser and
type the printer IP address in the address field. Then
navigate to Settings > General Settings > Print Recovery.
Note: If you do not know the IP address of the printer,
then print a network setup page and locate the IP address
in the TCP/IP section.
• If the printer is connected to a computer by a USB or parallel
cable, then open the Local Printer Settings Utility for
Windows or the Printer Settings for Macintosh.
b Resend the pages that did not print.
Were the jammed pages reprinted?
The problem is
solved.
Contact
customer
support.
Solving print problems
Printing problems
Print jobs do not print
Action Yes No
Step 1
a From the document you are trying to print, open the Print dialog
and check if you have selected the correct printer.
Note: If the printer is not the default printer, then you must
select the printer for each document that you want to print.
b Resend the print job.
Do the jobs print?
The problem is
solved.
Go to step 2.
Troubleshooting 151

Lexmark MS310 Series Specifications

General

Print Technology	Monochrome Laser
Processor Speed	800 MHz
Monthly Duty Cycle	Up to 50, 000 pages
Recommended Monthly Page Volume	500 - 2, 500 pages
Connectivity	USB 2.0, Ethernet
First Page Out Time	As fast as 6.5 seconds
Print Resolution	1200 x 1200 dpi
Memory	128 MB
Duplex Printing	Standard
Input Capacity	250 sheets
Output Capacity	150 pages
Media Types Supported	Plain paper, envelopes, card stock, labels
Media Sizes	Letter, Legal, Executive, Statement, Oficio, A4, A5, A6, B5 (JIS), B6 (JIS), Envelope (No. 10, Monarch, DL, C5)
Operating Systems Supported	Windows, macOS, Linux
Dimensions	399 mm