• Load letterhead faceup with the top edge entering the printer first. For two‑sided (duplex) printing, load
letterhead facedown with the bottom edge of the sheet entering the printer
first.
• Load envelopes with the
flap
on the left side facedown.
Warning—Potential Damage: Never use envelopes with stamps, clasps, snaps, windows, coated
linings, or self‑stick adhesives. These envelopes may severely damage the printer.
5 From the Embedded Web Server or from your computer, set the paper size and paper type in the Paper
menu to match the paper loaded in the multipurpose feeder.
Note: Depending on your operating system, access the Paper menu using Local Printer Settings Utility or
Printer Settings.
Linking and unlinking trays
The printer links trays when the specified paper size and type are the same. When a linked tray becomes empty,
paper feeds from the next linked tray. To prevent trays from linking, assign a unique custom paper type name.
Linking and unlinking trays
Using the Embedded Web Server
1
Open a Web browser, and then type the printer IP address in the address
field.
Notes:
• Print a network setup page or menu settings page, and then locate the IP address in the TCP/IP
section. The IP address appears as four sets of numbers separated by periods, such as
123.123.123.123.
Loading paper and specialty media 33
To Next Page
Loading...
