1
2
Notes:
• Load recycled or preprinted paper with the printable side facedown.
• Load prepunched paper with the holes on the top edge toward the front of the tray.
• Load letterhead facedown, with the top edge of the sheet toward the front of the tray. For two‑sided
printing, load letterhead faceup with the bottom edge of the sheet toward the front of the tray.
6 Insert the tray.
7 From the Embedded Web Server or your computer, set the paper size and type in the Paper menu to match
the paper loaded in the tray.
Notes:
• If the printer is not connected to a network, then access the Paper menu using Local Printer Settings
Utility or Printer Settings, depending on your operating system.
• Set the correct paper size and type to avoid paper jams and print quality problems.
Loading paper and specialty media 29
To Next Page
Loading...
