Lexmark MS310 Series - Page 62

Use To
Show Bookmarks
1
Ye s
No
Specify whether to display Bookmarks from the Held Jobs
area.
Note: Yes is the factory default setting.
Web Page Refresh Rate
1
30–300
Specify the number of seconds between Embedded Web
Server refreshes.
Note: 120 is the factory default setting.
Contact Name
1
Specify a contact name for the printer.
Note: The contact name is stored on the Embedded Web
Server.
Location
1
Specify the printer location.
Note: The location is stored on the Embedded Web Server.
Alarms
1
Alarm Control
Cartridge Alarm
Set an alarm when the printer requires user intervention.
Select from the following options:
O
Single
Continuous
Notes:
• Single is the factory default setting for Alarm Control.
• O is the factory default setting for Cartridge Alarm.
Timeouts
Standby Mode
1
Disabled
1–240
Set the duration of idle time before the printer enters a lower
power state.
Note: 15 minutes is the factory default setting.
Timeouts
Sleep Mode
Disabled
1–120
Set the idle time before the printer begins operating in Sleep
Mode.
Notes:
• 20 minutes is the factory default setting.
• Disabled appears only when Energy Conserve is set to
O.
• Lower settings conserve more energy, but may require
longer warm‑up times.
Timeouts
Print with Display
O
Allow printing with display
o
Display on when printing
Print a job with the display turned o.
Note: Display on when printing is the factory default setting.
1
This menu item appears only in touch‑screen printer models.
2
This menu item appears only in non‑touch‑screen printer models.
Understanding the printer menus 62