3-8 Service Manual
4025-XXX
Print Quality Pages
Execution of this diagnostic function causes the printer to print the Print Quality Test
Pages. Since the printer is in diagnostics, the toner cartridge lockout functionality is
disabled.
These pages can also be printed using the Configuration Menu Group; however, when
printed using this method the toner cartridge lockout functionality is enabled. This means
these pages cannot be printed unless the printer has installed a cartridge with a Machine
Class ID which matches the Machine Class ID stored in the printer NVRAM.
Note: Additional diagnostic information relating to print quality may be printed on the
Print Quality Pages when the pages are printed by executing this diagnostic function. This
additional information is not printed on the pages when the Configuration Menu Group
method is used to request that the printer print the pages.
As the pages are printed, the printer posts:
Once started, this operation cannot be cancelled. Furthermore, all key presses are
ignored while this message is posted.
Note: The value of the <media width> field is displayed once the printer narrow media
sensor has determined whether the media used for the Quick Test is narrow or wide. An
N indicates the media sensed is narrow and a W indicates the media sensed is wide.
Prt Quality Pgs
Printing... <media width>
To Next Page
Loading...
