1-72 Service Manual
4025-XXX
Paper Handling Devices
The printer uses the following paper output/paper size combinations:
Face Down Tray (standard)
The standard output tray for the printer. Paper is transported out of the printer face down
onto the printer Top Cover. This Tray holds up to 500 sheets of 20 lb. paper, and comes
equipped with Full Stack detection. When the Finisher is installed on the printer, the
maximum paper stack in the Face Down Tray is reduced to 300, and the Finisher monitors
Full Stack detection.
Finisher - option
The Finisher provides compiling, stapling, and stacking functions.
Mailbox - option
The Mailbox provides sorting functions.
Duplex - option
The Duplex unit provides printing on the front and back side of the paper.
Envelope Feeder - option
The Envelope Feeder replaces the MP Feeder and is used for feeding envelopes into the
printer.
MP Feeder (standard)
The MP Feeder lets you insert paper into a manual feed tray.
To Next Page
Loading...
