Connector Locations 5-31
4025-XXX
BD11 MP Feeder↔I/O PWB
The following table shows the signal names for this BD:
BD12 I/O PWB↔MCU PWB (1 of 7)
Signal Name Description
SNR#SIZEM Analog signal from the MP Feeder Size Sensor. 0VDC ~ 5VDC
SNR#NOPM Signal from the MP Feeder No Paper Sensor. 5V=Not actuated.
0V=Actuated
MSI#DET Signal between the IOT and the MP Feeder connection. 5V=MP Feeder
connected. 0V=MP Feeder Not connected
CL$FEEDM Switches the MP Feeder Feed Clutch. 24V=Actuated. 0V=Not actuated
MOT$LIFT1 Switches the Tray 1 Lift Motor. 24V=Actuated. 0V=Not actuated
SNR#TAROLL Signal from the Take Away Sensor. 5V=Not actuated. 0V=Actuated
To Next Page
Loading...
