98
The print media exits to bin 2, but there is not enough to grasp from the bin:
1 Open the finisher door (Door K).
2 Locate the right green knob above the stapler and turn it in the direction of the arrow. More of
the print media moves to the bin.
3 Pull the print media out of the bin. If the print media does not release easily, complete
step 1 on page 98 to step 2 on page 98, and then close the finisher door (Door K).
The print media is caught between the two bins in the accumulator area.
1 Push up on the green tab between the two bins and hold it in place.
2 Pull the jammed paper out.
Green tab
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
