273
Canceling Job
What this message means:
The printer is processing a request to cancel the current print job.
What you can do:
Wait for the message to clear.
See also:
Canceling a print job
Change Tray <x>
What this message means:
The printer is requesting different paper than what is loaded in the specified tray or defined by
the Paper Size or Paper Type settings for that tray.
What you can do:
•
Load paper of the requested size and type in the tray specified on the display. The printer
automatically clears the message and continues printing the job.
• Press Select to clear the message and continue printing on the paper currently loaded in the
tray.
• Press Menu to open the Job Menu and cancel the current job.
See also:
Paper Size; Paper Type; Loading the trays; Cancel Job; Canceling Job
Check Finisher
Installation
What this message means:
The optional finisher is detached from the printer.
What you can do:
Make sure the optional finisher is properly attached. Refer to the
Setup Guide
for information
on installing a finisher.
See also:
Setup Guide
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
