277
Disk Corrupted.
Reformat?
What this message means:
The printer has attempted a disk recovery process and cannot repair the disk. The disk cannot
be used unless it is reformatted.
What you can do:
•
Press Go. All disk data will be lost when the disk is reformatted.
• Press Stop to clear the message without reformatting the disk. Disk Recovery may be
displayed again and the printer will attempt to recover the disk.
See also:
Disk Recovery x/5 yyy%
Disk Recovery
x/5 yyy%
What this message means:
The printer is attempting to recover the hard disk after finding errors on it. The disk recovery
takes place in five phases. The second line on the operator panel shows the percent complete
of the current phase.
Note: Errors can occur if the printer is powered off while writing to the disk.
What you can do:
•
Wait for the message to clear. No button actions are possible while this message is displayed.
• To avoid this error in the future, do not turn off the printer unless Ready is displayed.
Empty Box M
What this message means:
Theholepunchboxisfull.
What you can do:
Empty the hole punch box.
See also:
Emptying the hole punch box
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
