308
55 Insufficient
Fax Buffer
What this message means:
The buffer used to process data is too full to receive an incoming fax. This has broken the
connection between the printer and the sending fax machine. The printer will not accept
additional fax data until sufficient fax buffer space is made available.
What you can do:
•
Press Go to clear the message and print any fax data stored in the fax buffer. The job may not
print correctly.
• Increase the size of the Fax Buffer in the Fax Menu.
What this message means:
Data has been sent to the printer through a parallel port, but the parallel port is disabled.
What you can do:
•
Press Go to clear the message. The printer discards any data received through the parallel
port.
• Make sure the Parallel Buffer menu item in the Parallel Menu is not set to Disabled.
See also:
Parallel Buffer
What this message means:
Data has been sent to the printer through a serial port, but the serial port is disabled.
What you can do:
•
Press Go to clear the message. The printer discards any data received through the serial port.
• Make sure the Serial Buffer menu item in the Serial Menu is not set to Disabled.
See also:
Serial Buffer
56 Parallel
Port <x> Disabled
56 Std Parallel
Port Disabled
56 Serial
Port <x> Disabled
56 Standard Serial Disabled
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
