Lexmark W820 - Page 311

309
What this message means:
Data has been sent to the printer through a USB port, but the USB port is disabled.
What you can do:
•
Press Go to clear the message. The printer discards any data received through the USB port.
• Make sure the USB Buffer menu item in the USB Menu is not set to Disabled.
See also:
USB Buffer
57 Configuration
Change
What this message means:
The printer was unable to restore confidential or held jobs on the hard disk because the print
configuration has changed.
Note: The messages 57 Configuration Change and Held Jobs May Not Be
Restored alternateonthedisplay.
What you can do:
Press Go to clear the message.
See also:
Using the Print and Hold function; Held Jobs May Not Be Restored
56 USB Port <x>
Disabled
56 Standard USB
Port Disabled
Downloaded From ManualsPrinter.com Manuals