Lexmark W820 - Page 48

46
Print too light The Toner Darkness setting is
too light.
Select a different Toner Darkness setting
from the printer driver before sending the
job to print.
Youareusingprintmediathat
does not meet the printer
specifications.
• Use recommended paper and other print
media. Refer to the
Card Stock & Label
Guide available on Lexmark’s Web site
at www.lexmark.com for detailed
specifications.
• Load print media from a new package.
• Avoid textured paper with rough finishes.
• Make sure the paper you load in the
trays is not damp.
Print too light The print cartridge is low on
toner.
Replace the print cartridge.
See Replacing the print cartridge.
The print cartridge is defective
or has been installed in more
than one printer.
Replace the print cartridge.
See Replacing the print cartridge
Symptom Cause Solution
Downloaded From ManualsPrinter.com Manuals