60
A printer message
indicates that all
linked bins are full,
butsomebinsare
empty.
There is no bin available to
perform the finishing
functions requested by the
print job because the bin is
full.
To clear the message, remove the stack of paper from
the bin.
The 287 Paper Jam
Open Deflector G
message displays
after you install the
finisher.
The divertor cover is installed
incorrectly.
Remove and realign the divertor cover. Refer to the
Setup Guide
for instructions.
Feed direction
streaks are on stacks
of paper exiting to
the bins.
The wiper blade is dirty or
installed incorrectly.
Remove, clean, and reinstall the wiper blade. See
Cleaning the wiper blade or refer to the instruction
sheet in the maintenance kit box.
Symptom Cause Solution
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
