158
3-3. Adjusting the seats
RX350_U_OM48E90U
■ The rear seatbacks can be adjusted when (power seat)
■ The rear seatbacks can be folded down when (power seat)
When all of the following conditions are met, a rear seat operation switch can be used to
fold down the rear seatback:
● When using the rear seat operation switch (rear seat): The rear door nearest to the seat
to be operated is open.
● When using the rear seat operation switch (luggage compartment): The back door is
open.
● The other seat operation switch for the seat to be operated is not being pressed.
When the engine switch is in IGNITION ON mode, one of the following conditions must
also be met in order for the power seat to be operated:
• The parking brake is engaged.
• The brake pedal is depressed.
• The shift lever is in P.
When the rear seatback is in a position within
the range A shown in the illustration, the rear
seat operation switch (rear seat) can be used to
adjust the rear seatback.
● When the engine switch is turned off or in
ACCESSORY mode
● When using the rear seat operation switch
(rear seat): The rear seatback is in a position
within the range A shown in the illustration.
● When using the rear seat operation switch
(luggage compartment): The rear seatback is
in a position within the range B shown in the
illustration.
To Next Page
Loading...
