LG MultiSITE MS8000 Series - Page 33

33
User Manual
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. “LG Life’s Good” is a registered trademark of LG Corp.
Conguration Parameters Default Value Signicance and Adjustments
Fan Type
Default Value: 3 speed
Fan type configuration determines the fan control method for the fan coil unit.
Three (3) Speed: Fan control using 3 binary outputs (Low, Medium, High).
ECM: Fan control using 0-10 Vdc Modulating output.
ECM Low Volt.
Default Value: 2.2 Vdc
Point only displayed if “Fan control” is set to “ECM”.
Voltage to be applied on 0-10 Vdc output when Low fan speed is selected.
The points are configurable in units of 0.1 Vdc.
Range: 2.0 to 4.0 Vdc.
ECM Med. Volt.
Default Value: 6 Vdc
Point only displayed if “Fan control” is set to “ECM”.
Voltage to be applied on 0-10 Vdc output when Low fan speed is selected.
The points are configurable in units of 0.1 Vdc.
Range: 4.1 to 7.0 Vdc.
ECM High Volt.
Default Value: 8.6 Vdc
Point only displayed if “Fan control” is set to “ECM”.
Voltage to be applied on 0-10 Vdc output when Low fan speed is selected.
The points are configurable in units of 0.1 Vdc.
Range: 7.1 to 10.0 Vdc.
CONFIGURATION SCREENS
MS8350 Conguration 3 / 9
Table 16: MS8350 Conguration 3 / 9 Parameter Details, continued.
For MS8350 Only