Lighthouse Handheld 2016 - Page 82

Lighthouse HANDHELD 2016, 3016, 5016 Gen F Operating Manual
4-54
248083400-1 Rev 7
• When the reports mode is enabled, the currently selected report
type and minimum required samples will be displayed on the
MAIN screen as shown in Figure 4-66.
Figure 4-66 Reports Data
• The instrument keeps track of and will display on the MAIN screen
the number of samples taken for the report.
• If Auto Increment is enabled, the user will be prompted to move the
particle counter to the next assigned location after the completed
number of cycles.
• If Printing is enabled and Auto Increment is enabled, the report will
be printed after the required number of samples are completed.
• After the required number of samples have been completed, the
instrument will prompt the user to disable Reports Mode as shown
in Figure 4-67.
Figure 4-67 Disable Reports Prompt