Lighthouse Handheld 2016 - Page 86

Lighthouse HANDHELD 2016, 3016, 5016 Gen F Operating Manual
4-58
248083400-1 Rev 7
• Press the FLOW button to display screen shown in Figure 4-72.
Figure 4-72 Reports Air Flow Screen
• Choose the appropriate type of air flow (Unidirectional, Non-
Unidirectional), then press the BACK button to return to the
SETUP screen.
Note:
Recipes and
locations cannot be saved
for reports if Reports are
disabled and if there are
not enough locations to
allocate to the report. The
"LOC" and "SAVE buttons
will not be displayed in
these cases.
• The SETUP screen shown in Figure 4-73 will display the values
that were configured in the display fields.
Figure 4-73 Configure the Instrument
Use this information to set up the instrument to meet or exceed the
minimum requirements.