Lightmed LightLas 532 - Page 8

LightLas 532 – Operator's Manual Rev. No 01 Page 8 of 115
Figure
Description
Page
5.27(a)
Checking Field of View set-up
76
5.27(b)
Checking manipulator operation on the target
76
5.28(a)
New Type Version Check Slitlamp focus on Target Rod and Laser focus
of aiming beam
79
5.28(b)
Old type Version Adjust the Attachment LDU Spot Size Focus using the
knob on the mounting arm
80
5.29
Old type version Adjusting Micromanipulator Arm to verify Laser Spot is
in the Aperture Center
80
5.30
Old / New type version Adjusting sideways movement of Attachment
LDU during alignment
81
5.31(a)
Fiber and Delivery Key fitted to Console Front Panel
82
5.31(b)
LIO Intensity Control Knob
83
8.1
Sample of Error code display
102
Record Sheet
Installation Record Sheet
84/85/86
Power Meter Calibration Record Sheet
96
Appendix I
All the Accessories Listing Detailed
113/114