HDMI-3D-OPT series – User's Manual 47
Change the Video Input Priorities
Description: The settings of video input priority can be changed as follows.
Example
1
2
n
1
2
n
{prio_v1=1;0;2;3}
Legend:
Priority number of the input ports. See more details
about port numbering in the
Numbering section.
Explanation: Input 2 has the highest priority (0), Input 1 has the second highest (1). Input 4 has the lowest
priority (3).
ATTENTION! Always set all the priority of the ports when changing, otherwise, the change will not be
executed and the response will be the current setting (like querying the priority setting).
Change the Audio Input Priorities
Description: The settings of video input priority can be changed as follows.
Example
1
2
n
1
2
n
Legend:
Priority number of the input ports. See more details
about port numbering in the
Numbering section.
Explanation: Input 2 has the highest priority (0), Input 1 has the second highest (1). Input 6 has the lowest
ATTENTION! Always set all the priority of the ports when changing, otherwise, the change will not be
executed and the response will be the current setting (like querying the priority setting).
Description: IP address settings can be queried as follows.
Example
Command {IP_STAT=?}
{ip_stat=?}
192.168.0.1)
Legend:
0 = static IP; 1 = DHCP.
IP address (four decimal octets separated by dots).
Subnet mask (four decimal octets separated by dots).
Gateway address (four decimal octets separated by dots).
Explanation
gateway address is 192.168.0.1.
Set the IP Address
Description: IP address can be set as follows.
Example
{ip_address=0;192.168.0.110}
(IP_ADDRESS=0;192.168.0.110)
Legend
Set the Subnet Mask
Description: Subnet mask can be set as follows.
Example
Legend
mask is not valid.
To Next Page
Loading...
