CHAPTER 5. PLAYBACK
To playback, please press Play button on the remote controller, a keyboard, or the keypad.
A playback message box shows up for searching video clips. The details are described in
the following sections:
Chapter 5-1. Time Search
Time search feature can perform date and time search based on recorded video data. This
feature is very easy-to-use, and it allows a user to perform video searching task throughout
hard disk drives. To perform time search operation, simply press Left or Right button on the
highlighted date or time field. To change the date and time, please press Up or Down button.
Chapter 5-2. Event Search
Event list contains information including date, time, event type, and camera channel for the
event. There are external alarm event and motion alarm event that can be found in event list.
To filter out events, please set starting and ending time in the event search dialog box. To
view operation log, please see System->Log View for detail.
PLAYBACK
TIME SEARCH
EVENT SEARCH
RECORD TIME EVENT
05/07/04 13:40:48 ALARM CH01
05/07/04 13:40:42 ALARM CH01
05/07/04 13:40:35 ALARM CH01
TIME SEARCH
To Next Page
Loading...
