Time Sync
Time Sync feature allows the DVR to synchronize its timer system to PIH-931D keyboard.
To synchronize DVR’s timers to a PIH-931D keyboard, please set this option to Keyboard.
PIH-931D keyboard starts to synchronize every 15 minutes.
NTP
To use NTP time sync, please select NTP service at Time Sync selection. The DVR will
automatically synchronize with an NTP server.
Chapter 6-6-2. HDD Information
HDD INFO shows the following information:
1. Size—The capacity of the hard disk drive
2. Approximate recording hour—recording hours based on the HDD(s)
3. Approximate recording days—recording days based on the HDD(s)
4. Average frame size—Average picture size
HDD INFO
Warning: Highly recommend to re-format HDD, if the timer has been set and the HDD has
recorded video data.
Warning: Highly recommend to perform Time Sync feature before the DVR starts to record
video.