HDD Format
To format HDDs, please select HDD Format menu item. Password is required for preventing
unauthorized access. A warning message also gets prompted for formatting verification.
Please be alerted to this operation. It may erase not only event list data but also recorded
video data. Press Enter button at HDD Format menu to format the hard disk drives.
Formatting hard disk drives may take several seconds based on the number of lists recorded.
Chapter 6-6-3. Password/Access
The DVR has three sets of password protection (accounts) preventing unauthorized access.
To activate password function, please turn Enable Password on or off at System->Password.
The password consists of four to eight digits for entering the DVR. The default passwords
are admin, “1111”, operator, “2222”, and guest, “3333”. The acceptable characters are 1 to
10 (0) and A to Z. To change the password setting, please press Enter at System-
>Password->Change Password.
Access Property
Each account can be assigned for access rights including video playback, menu setup, video
backup, PTZ setup, network setup, and remote network playback. For an administrator, she
or he can manage various access rights for other users.
PASSWORD/ACCESS
USER ADMIN
OLD PASSWORD ****
NEW PASSWORD ****
CONFIRM PASSWORD ****
PROPERTY
ENABLE PASSWORD OFF
PROPERTY
PLAYBACK ON
SETUP ON
BACKUP ON
PTZ SETUP ON
NETWORK SETUP
ON
REMOTE PLAYBACK ON
Note: In case, forgetting your password, please contact your sales agent for master
password.
To Next Page
Loading...
