PIH-7000 (MLP1) 9600 3
PIH-7600 (MLP1) 9600 3
PIH-7625-3 (MLP1) 9600 3
PIH-7625-7 (MLP2) 9600 7
PIH-7622-7 (MLP2) 9600 7
Pelco D 2400~9600 None
Pelco P 2400~9600 None
Chapter 6-8-3. Preset Setup
A preset of a PTZ camera can be configured for manipulation during live monitoring. Panning,
tilting, zooming, calling presets, auto panning, and other PTZ features provided by a PTZ camera
can also be accessed during live monitoring mode. All the features should be configured before
accessing PTZ functions. Please follow the rest of this chapter to setup a preset:
Chapter 6-8-4. Preset
To define a preset, press Left or Right button on the keypad or the remote controller to
change the preset number.
Chapter 6-8-5. Dwell
Define dwell of a preset. Dwell number ranges from 0 to 255 (the shortest to the longest).
Chapter 6-8-6. Speed
Define speed of previous preset to the next preset. The speed number ranges from 1 to 8
(the slowest to the fastest). The speed might vary based on different PTZ device’s settings.
Chapter 6-8-7. Position
To adjust PTZ lens position, press Enter at Adjust Pos menu item. A PTZ screen keypad
shows up as a reminder. Please press Left, Right, Up, or Down button on remote controller
to move the PTZ lens. To zoom in and/or zoom out of the PTZ device, press Zoom In.
PRESET SETUP
To Next Page
Loading...
