Linde H30D - Engine; Checking the engine oil level

5 Maintenance
Inspection and maintenance overview
At operating hours
1000 2000 4000 5000 7000
8000 10000 11000 13000 14000
Carried
out
16000 17000 19000 20000
9
8
Chassis, bodywork and fittings
Chassis, tilt cylinders and steering axle: Check fastening
Check and grease other bearings and joints
Chassis frame
Check the parking brake for correct operation
Clean and grease steering axle
Steering cylinder and steering pivot pin: Check fastening
Controls
Check and oil the pedals
Electrics
Check the condition and secure positioning of electric cables, cable connectors and
cable connections
Battery: check condition, acid level and acid density (even for maintenance-free
battery)
Hydraulics
Hydraulic system: Check the oil level.
Check the bleeder valve on the hydraulic oil tank for correct operation
Check the hydraulic system for leaks
Double hoses: Check the pre-tension
Load lift system
Lift mast, lift mast chain, lift cylinder and end stops: Check condition, secure faste-
ning and function
Adjust lift mast chain and spray with chain spray
Check fork arms and arm safety devices
Clean and grease the sideshift, check fastening
Clean and grease fork positioner, check fastening
Subsequent tasks
Carry out functional test and test drive
Attach maintenance sticker
104 Operating Instructions – 393 807 1001 EN – 08/2008