Operation 4
Working under load
d3921431
¾ Do not transport loads if they are shifted to
the side (e.g. with sideshift).
¾ Transport loads close to the floor.
¾ On ascending/descending routes
, always
travel with the load facing uphil
l; never travel
diagonally or turn around.
¾ If visibility is poor, instructions should be
provided by a second person.
¾ Iftheloadtobetransportedisstackedso
high as to obstruct visibility in the direction
of travel, the truck must only be driven in
reverse.
Setting down loads
DANGER
Never stop and leave the vehicle with the load still
raised.
Let down the fork carriage until the fork arms touch
the ground.
¾ Carefully move the forklift truck to the load /
storage area.
¾ Lift the fork carriage to the necessary height.
¾ Position the lift mast so it is vertical (load
horizontal).
¾ Observe the lift mast position identification
symbol (1) on the indicator unit if your forklift
truck is equipped with automatic lift mast
position identification.
¾ Carefully move the load over the load / stor-
age area.
¾ Carefully lower the load until the fork arms
are clear.
¾ Back the forklift truck away.
Operating Instructions – 393 807 1001 EN – 08/2008 85
To Next Page
Loading...
