Maintenance 5
Inspection and maintenance overview
1000hserviceplan
At operating hours
1000 2000 4000 5000 7000
8000 10000 11000 13000 14000
Carried
out
16000 17000 19000 20000
9
8
Information on service plan
Dependent on the consumables used, driving style and operating conditions, but
at least after 1, 5, 7, 11, 13, 17 and 19 years of service. Refer also to consumable
recommendations.
Preparations
Clean the truck if necessary
Read out error log and delete
Calibrate the drive potentiometer and joysticks
Enter the next maintenance interval
Engine
Change engine oil
Change engine oil filter
Change the fuel filter
Check condition and secure positioning of engine cradle and engine mounting
Check condition of V-ribbed belt
Check condition and tension of toothed belt
Clean water and hydraulic oil coolers
Check the coolant concentration
Change air filter cartridge, check vacuum-operated switch
Change the breather for charge air regulation
Clean the oil bath air filter
Check suction and exhaust pipes for leaks
Check particulate filter system
Clean the pressure control device at the exchangeable particulate filter
Clean the water trap at the exchangeable particulate filter
Gearbox
Axle clamps and wheel motors: Check fastening
Drive axle: Check the side stops
Operating Instructions – 393 807 1001 EN – 08/2008 103
To Next Page
Loading...
