4 Operation
Special equipment
NOTE
On cool, humid days, the heater and air con-
ditioning can be used to dehumidify the air
in the cab (operate the heater and air condi-
tioning simultaneously). The vehicle heater
counteracts the cooling effect. This ensures a
pleasant temperature inside the cab and pre-
vents the windows misting up.
Linde Forklift Data Management
(LFM)
Forklift Data Acquisition
The input device (1) for Fo
rklift Data Acquisi-
tion (FDE) is mounted on th
e front left-hand
post of the overhead guard
The input device has a 12-digit keypad (3).
In the standard setting the issue of 5-digit PIN
numbers to the respective drivers ensures that
only authorised personnel can operate the
fork-lift truck. The vehicle can only be started
after inputting this PIN number and possibly a
state code (depending on the setting).
NOTE
The PIN number can be extended from 5 to 8
digits. Before inputting the PIN number please
check with your fleet manager about the num-
ber of digits for the PIN number and setting of
the vehicle.
Status code
NOTE
The code indicates the state of the vehicle.
The following codes are available:
0
=TruckOK
1
= Request service (truck will not start)
2
= Request maintenance (truck starts)
3
= Problem with driving
4
= Problem with lifting
76 Operating Instructions – 393 807 1001 EN – 08/2008
To Next Page
Loading...
