5 Maintenance
Engine
be cleaned at regular intervals, depending on
how much it is used.
¾ Disconnect the hose (1) from the pipe union
at the fuel signal transmitter and blow dry
compressed air through it.
¾ Slide the hose (1) onto the pipe u
nion as far
as the stop.
Checking the coolant level
ENVIRONMENT NOTE
Observe information regarding working with
consumables.
NOTE
If the display lights up (depending on the mo-
del) (special equipment) (1) the coolant level
is too low and more coolant must be added.
If the coolant continues to fall below the min.
mark, the truck only moves at crawling speed.
NOTE
For models without a display (1) the coolant
level can be checked at the viewing window
(2).
CAUTION
Only use an approved coolant.
Observe the recommendations for consumables.
122 Operating Instructions – 393 807 1001 EN – 08/2008
To Next Page
Loading...
