Linksys LGS326P

117
3. Click Search. The interfaces matching the query criteria are displayed.
For each port or LAG, select its association type.
•
Static—The port is statically configured as a Multicast router port.
•
Dynamic—(Display only) The port is dynamically configured as a Multicast router
port by a IGMP query. To enable the dynamic learning of Multicast router ports, go
to the IGMP Snooping page.
•
Forbidden—This port is not to be configured as a Multicast router port, even if
IGMP queries are received on this port. If Forbidden is enabled on a port, Mrouter is
not learned on this port (i.e. MRouter Ports Auto-Learn is not enabled on this port).
•
None—The port is not currently a Multicast router port.
4. Click Apply to update the device.
Forward All
The Forward All page enables and displays the configuration of the ports and/ or LAGs that are to
receive Multicast streams from a specific VLAN. This feature requires that Bridge Multicast
filtering in the Feature Configuration page be enabled. If it is disabled, then all Multicast traffic is
flooded to ports in the device.
You can statically (manually) configure a port to Forward All, if the devices connecting to the port
do not support IGMP.
IGMP messages are not forwarded to ports defined as Forward All.
Note—The configuration affects only the ports that are members of the selected VLAN.