9
Chapter 2 – System Status
System Summary
The System Summary page provides a graphic view of the device, and displays device status,
hardware information, firmware version information, general PoE status, and other items.
To view system information, click System Status > System Summary.
The System Summary page
contains system and hardware information.
•
System Mode—Specifies whether the system is operating in Layer 2 system mode.
•
System Description—A description of the system.
•
System Location—Physical location of the device.
To edit this field, go to Configuration >
System Management > System Information.
•
System Contact—Name of a contact person.
To edit this field, go to Configuration >
System Management > System Information.
•
Host Name—Name of the device.
By default, the device host name is composed of the
word “switch” followed by the three least significant bytes of the device base MAC address
(the six furthest right hexadecimal digits).
•
Base MAC Address—Device MAC address.
•
SNMP Object ID—Unique vendor identification of the network management subsystem.
To Next Page
Loading...
