163
•
R
eauthentication Period—Enter the number of seconds after which the selected
port is reauthenticated.
4. Click Apply. The port settings are written to the Running Configuration file.
Authenticated Hosts
To display details about authenticated users:
Click Configuration > Security > Network Access Control > Authenticated Hosts.
•
User Name—Supplicant names that were authenticated on each port.
•
MAC Address—Displays the supplicant MAC address.
•
Port—Number of the port.
•
VLAN ID—VLAN where the host is learned or assigned.
•
Session Time – Amount of time that the supplicant was logged on the port.
•
Authentication Method—Method by which the last session was authenticated.
The following table shows which combinations of authentication method and port mode
are supported.
Authenticatio
n Method
Multi-host Multi-sessions
Device in L3 Device in L2
802.1x † † †
MAC † † †
†—The port mode also supports the guest VLAN and RADIUS-VLAN assignment.
This device is a L2 device.
To Next Page
Loading...
