176
IPv6-Based ACL
T
o define an IPv6-Based ACL:
1. Click Configuration > Access Control List > IPv6 Based ACL.
This page contains all currently defined IPv6-Based ACLs.
2. Click Add.
3. Enter the name of the new ACL in the ACL Name field. The names are case-sensitive.
4. Click Apply. The IPv6-Based ACL is saved to the Running Configuration file.
IPv6-Based ACE
To add rules (ACEs) to an IPv6-Based ACL:
1. Click Configuration > Access Control List > IPv6-Based ACE.
To Next Page
Loading...
