EasyManuals Logo

Linksys LGS326P User Manual

Linksys LGS326P
209 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #114 background imageLoading...
Page #114 background image
114
IGMP Snooping
To enable IGMP Snooping and identify the device as an IGMP Snooping Querier on a VLAN:
1.
Click Configuration > Multicast > IGMP Snooping.
2.
Enable IGMP Snooping.
When IGMP Snooping is enabled globally, the device monitoring network traffic can
determine which hosts have requested to receive Multicast traffic.
The device only performs IGMP Snooping if both IGMP snooping and Bridge Multicast
filtering are enabled.
3.
Select a VLAN, and click Edit.
4.
Enter the parameters:
VLAN ID-Select the VLAN ID on which IGMP snooping is defined.
IGMP Snooping Status-Enable or disable the monitoring of network traffic for the
selected VLAN.
Auto Learn MRouter Ports -Select to enable auto learning of the ports to which the
Mrouter is connected.
Immediate Leave-Select to enable Immediate Leave to decrease the time it takes
to block a Multicast stream sent to a member port when an IGMP Group Leave
message is received on that port.
IGMP Querier-Select to enable the IGMP Querier.
IGMP Querier Version-Select the IGMP version used if the device becomes the
elected querier. Select IGMPv3 if there are switches and/or Multicast routers in
the VLAN that perform source-specific IP Multicast forwarding.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Linksys LGS326P and is the answer not in the manual?

Linksys LGS326P Specifications

General IconGeneral
Switch typeManaged
Switch layer-
Quality of Service (QoS) supportYes
Combo SFP ports quantity2
Installed SFP+ modules quantity0
Gigabit Ethernet (copper) ports quantity26
Basic switching RJ-45 Ethernet ports typeGigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity24
10G supportNo
Number of VLANs128
Networking standardsIEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3af, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Virtual LAN featuresTagged VLAN
Copper ethernet cabling technology1000BASE-T, 100BASE-T, 10BASE-T
DHCP featuresDHCP client
Security algorithms802.1x RADIUS
Throughput38.69 Mpps
Jumbo frames9000
MAC address table8000 entries
Product colorBlack, Blue
LED indicatorsActivity, Link, PoE, System
Number of fans2 fan(s)
Memory typeDRAM
Internal memory128 MB
Input current3.5 A
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (typical)28.58 W
Total Power over Ethernet (PoE) budget192 W
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)0 - 50 °C
Operating relative humidity (H-H)10 - 90 %
Weight and Dimensions IconWeight and Dimensions
Depth200 mm
Width440 mm
Height44 mm
Weight3096 g

Related product manuals