Linksys LGS326P User Manual

85
•
Interface—Port/LAG ID.
•
PVID—Port PVID is set to this VLAN. If the interface is in access mode or trunk
mode, the device automatically makes the interface an untagged member of the
VLAN. If the interface is in general mode, you must manually configure VLAN
membership.
•
Access—Select to make the interface an access interface on this VLAN.
•
Trunk—Select to make the interface a trunk interface on this VLAN.
•
General Port—The interface can support all functions as defined in the IEEE
802.1q specification. The interface can be a tagged or untagged member of one or
more VLANs.
•
Forbidden—The interface is not allowed to join the VLAN. When a port is not a
member of any other VLAN, enabling this option on the port makes the port part of
internal VLAN 4095 (a reserved VID).
•
Excluded—The interface is currently not a member of the VLAN. This is the default
for all the ports and LAGs when the VLAN is newly created.
•
Tagged—The interface is a tagged member of the VLAN. This is not relevant for
Access ports.
•
Untagged—The interface is an untagged member of the VLAN. Frames of the
VLAN are sent untagged to the interface VLAN. This is not relevant for Access
ports.
3. Click Apply. The settings are modified and written to the Running Configuration file.
VLAN Groups
This section describes how to configure Mac-based VLAN groups.
VLAN groups classify packets into VLANs based on their MAC addresses.
VLAN groups can be used to separate traffic into different VLANs for security and/or load
balancing.
If several classifications schemes are defined, packets are assigned to a VLAN in the following
order:
•
TAG—If the packet is tagged, the VLAN is taken from the tag.
•
MAC-Based VLAN—If a MAC-based VLAN has been defined, the VLAN is taken from the
source MAC-to-VLAN mapping of the ingress interface.
•
PVID—VLAN is taken from the port default VLAN ID.

Linksys LGS326P Specifications

General

Switch type	Managed
Switch layer	-
Quality of Service (QoS) support	Yes
Combo SFP ports quantity	2
Installed SFP+ modules quantity	0
Gigabit Ethernet (copper) ports quantity	26
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity	24
10G support	No
Number of VLANs	128
Networking standards	IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3af, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Virtual LAN features	Tagged VLAN
Copper ethernet cabling technology	1000BASE-T, 100BASE-T, 10BASE-T
DHCP features	DHCP client
Security algorithms	802.1x RADIUS
Throughput	38.69 Mpps
Jumbo frames	9000
MAC address table	8000 entries
Product color	Black, Blue
LED indicators	Activity, Link, PoE, System
Number of fans	2 fan(s)
Memory type	DRAM
Internal memory	128 MB
Input current	3.5 A
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (typical)	28.58 W
Total Power over Ethernet (PoE) budget	192 W
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Depth	200 mm
Width	440 mm
Height	44 mm
Weight	3096 g