29
If you decide to use SNMPv3:
1.
Define the SNMP engine by using the Engine ID page. Either create a unique Engine ID or
use the default Engine ID. Applying an Engine ID configuration clears the SNMP database.
2.
Optionally, define SNMP view(s) by using the Views page. This limits the range of Object
IDs available to a community or group.
3.
Define groups by using the Groups page.
4.
Define users by using the SNMP Users page, where they can be associated with a group. If
the SNMP Engine ID is not set, then users may not be created.
5.
Optionally, enable or disable traps by using the Trap Settings page.
To Next Page
Loading...
