33
Views
A view is a user-defined label for a collection of MIB subtrees. Each subtree ID is defined by the
Object ID (OID) of the root of the relevant subtrees. Either well- known names can be used to
specify the root of the desired subtree or an OID can be entered (see Device Model Object IDs
).
Each subtree is either included or excluded in the view being defined.
The Views page enables creating and editing SNMP views. The default views (Default,
DefaultSuper) cannot be changed.
Views can be attached to groups in the Groups page or to a community which employs basic
access mode through the Communities page.
To define SNMP views:
1.
Click Configuration > System Management > SNMP > Views.
2.
Click Add to define new views.
3.
Enter the parameters.
•
View Name—Enter a view name between 0-30 characters.
•
View Object—Select the node in the MIB tree that is included or excluded in the
selected SNMP view. The options to select the object are as follows:
o
Object ID—Enter an OID not offered in the Object ID Selection List option.
o
Object ID Selection List—Enables you to navigate the MIB tree. Press the
Up arrow to go to the level of the selected node's parent and siblings; press
the Down arrow to descend to the level of the selected node's children.
Click nodes in the view to pass from one node to its sibling. Use the
scrollbar to bring siblings in view.
To Next Page
Loading...
