Linksys LGS326P

71
To view the LLDP local port status advertised on a port:
1. Click Configuration > Port Management Discovery - LLDP > LLDP Local Information.
2. Select the desired port from the Port list.
This page displays the following groups of fields (the actual fields displayed depend on the
optional TLVs selected to be advertised):
•
Global
o
Chassis ID Subtype—Type of chassis ID. (For example, the MAC address.)
o
Chassis ID—Identifier of chassis. Where the chassis ID subtype is a MAC
address, the MAC address of the device appears.
o
System Name—Name of device.
o
System Description—Description of the device (in alpha-numeric format).
o
Supported System Capabilities—Primary functions of the device, such as
Bridge, WLAN AP, or Router.
o
Enabled System Capabilities—Primary enabled function(s) of the device.
o
Port ID Subtype—Type of the port identifier that is shown.
o
Port ID—Identifier of port.
o
Port Description—Information about the port, including manufacturer,
product name and hardware/software version.
•
Management Address
o
Displays the table of addresses of the local LLDP agent. Other remote
managers can use this address to obtain information related to the local
device. The address consists of the following elements:
o
Address Subtype—Type of management IP address that is listed in the
o
Management Address field; for example, IPv4.
o
Address—Returned address most appropriate for management use.
o
Interface Subtype—Numbering method used for defining the interface
number.
o
Interface Number—Specific interface associated with this management
address.
•
MED Information
o
Capabilities Supported—MED capabilities supported on the port.
o
Current Capabilities—MED capabilities enabled on the port.
o
Device Class—LLDP-MED endpoint device class. The possible device
classes are:
o
Endpoint Class 1—Generic endpoint class, offering basic LLDP services.