80
The Smart device supports up to 128 VLANs, including the default VLAN. Each VLAN must be
configured with a unique VID with a value from 1 to 4094. The device reserves VID 4095 as the
Discard VLAN and VID 4094 for 802.1x. All packets classified to the Discard VLAN are discarded
at ingress, and are not forwarded to a port. The VLANs page enables you to change the default
VLAN and create a new VLAN.
To change or add a VLAN:
1.
Click Configuration > VLAN Management > VLANs.
2.
Click Add to add one or more new VLANs.
The page enables the creation of either a single VLAN or a range of VLANs.
3.
Enter the following fields for the new VLANs.
•
VLAN—Select one of the following options:
-
Single VLAN—Select to create a single VLAN.
-
Range of VLANs—Select to create a range of VLANs and specify the range
of VLANs to be created by entering the Starting VID and Ending VID,
inclusive. When using the Range function, the maximum number of VLANs
you can create at one time is 100.
•
VLAN ID—Enter a VLAN ID.
•
VLAN Name—Enter a VLAN name.
•
VLAN ID Range—Enter a range of VLANs.
4.
Click Apply to create the VLAN(s).
To Next Page
Loading...
