Lite-Puter CX-5 - How to Load a PATTERN by Program; How to Store a PATTERN into SCENE 301-306; How to Load a SCENE; How to Delete a SCENE

ISO 9001 CERTIFIED
CX-5 [EUM-B] 10
by the same way.)
STEP-4 ：Press ”ENTER” when a SCENE is named, than adjust the VR of ”Xfader
SPEED” and ”Chase SPEED” to set the output time( from 0.1 … 25.4 Second).
SC － 1 。 XFD － 0.5Sec
Adj SPEED VR .
STEP-5 Press ”ENTER” for storing the SCENE
3-3 How to load a pattern by program
Please reference 10-2, Step1 ~Step5. All the patterns must be stored into Scene
301-306.
3-4 How to store a pattern into SCENE 301~306
Please reference 10-2, Step6 ~Step7
3-5 How to load a SCENE
STEP-1 ：Press ”SCENE” and key in the SCENE number (from 1…306)
SCENE
Keyin Number .
STEP-2 ：Press ”GO”
3-6 How to delete a SCENE
STEP-1 : Press ”SCENE”
STEP-2 : Press ”DEL.” and key in SCENE number (from 1…306)
SCENE _ DEL. NO.YES
Keyin Number .