Lite-Puter CX-5 - How to Delete a STEP from a CHASE

ISO 9001 CERTIFIED
CX-5 [EUM-B] 15
FAVORITE CHASE
P 1 = CHASE 23
FAVORITE CHASE
P 1 = CHASE 1
(the LCD vernier is flashing at “P 1” )
STEP-4 : Use “ + 4 ” to move the vernier to “CHASE ?” , and key in the “CHASE” number
(from 1…50) .that is going to be corresponded to “P 1”
(for example, key in “2” , “3” means 即 “P1 = CHASE 23”)
STEP-5 : Use “w - “ and “ + 4 ” to move the vernier, and key in the “CHASE” number
(from 1…50) you are going to be corresponded to.
STEP-6 : Move the vernier to “CHASE” and press “ENTER” to confirm the change of
correspondence to HOT KEY.
4-5 How to delete a STEP from a CHASE
STEP-1 ：Press ”CHASE” and ”PROG”
CH －－－。－－－－
Keyin Number .
STEP-2 ：Use ‘0…9’ to select ”CHASE” number (from 1…50)，then press ”ENTER”
(for example, CHASE 1 has the following steps:
STEP 1 → SCENE 1
STEP 2 → SCENE 2
STEP 3 → SCENE 3
STEP 4 → SCENE 4
STEP 5 → SCENE 5
STEP 6 → SCENE 6
CH －－ 1 。 －－－－－
ABC
(LCD LINE 2 will reveal the name of “CHASE”，if it is not an empty CHASE, press ”YES” to
overwrite)