Lite-Puter CX-5 - Introduction of the Functions

ISO 9001 CERTIFIED
CX-5 [EUM-B]
5
1-4 Introduction of functions
l SCENE：
306 sets and all are namable.
l CHASE：
(1) 50sets of namable memories.
(2) EachEach CHASE has 60 STEP(a STEP can be a SCENE)
l MACRO：
(1) 50 sets of namable memories.
(2) Each MACRO has 60 STEP(a STEP can be a SCENE or a CHASE)
l LEARN：
(1) 50sets of namable memories.
(2) Each LEARN has 60 STEP(a STEP can be a SCENE)
(2) The time between STEP and STEP is adjustable by a previous setting of user.
l “FINE” KEY：For a limited range adjustment in a SCENE.
l “BLACK” KEY：One key to turn off all the LAMP.
l “A.” KEY :
For switch between “RUN MODE” and “EDIT MODE”
It means “RUN MODE” when the LED is bright. (P1..P12 is Hot key)
It means “EDIT MODE” when the LED is dark. (P1..P12 is the on / off switch of the
lighting fixtures.)
l “P1 … P12” (HOT KEY) : IMPORTANT !
(1) In “EDIT MODE” , “P1…P12” means the “ON” or “OFF” switch of
LAMP1…12
(2) In “RUN MODE” , “P1…P12” means: