Lite-Puter CX-5 - Chapter 6 LEARN; How to Edit and Store a LEARN

ISO 9001 CERTIFIED
CX-5 [EUM-B] 25
Chapter 6 LEARN
6-1 How to edit and store a LEARN
STEP-1 ：Press ”LEARN” then ”PROG”
LN －－－。－－－－－
Keyin Number .
STEP-2 ：Use number key ‘0…9’to select ”LEARN” number (from 1…50)，then
press ”ENTER”
LN －－ 1 。 －－－－－
EMPTY CHASE
(LCD LINE 2 will reveal the name of the“LEARN” or EMPTY CHASE，
Press ”YES” to overwrite the CHASE)
STEP-3 ：Key in the name of the ”LEARN” by number key ”1…9”
LN －－ 1 。 AB_
Keyin ENGLISH
(Use ”0” (Sel.) KEY to confirm when a character was selected, than key in the following characters
by the same way.)
STEP-4 ：Press ”ENTER” when the ”MACRO” is named
LN －－ 1 。 AB
MAPING CHASE 0
(now the vernier is flashing at the “MAPING CHASE 0” of the LCD)
STEP-5 :: Key in the “MAPING CHASE” number by number key “0…9” and press “ENTER”
LN －－ 1 . AB
MAPING CHASE 2
(for example, press “MAPING CHASE 2” means “LEARN 1” is corresponded to “CHASE
2”)
If the CHASE 2 has the followig date :
STEP 1 → SCENE 4 ; CHASE SPEED 0.5 SCE ; Xfader SPEED 1.0 SEC