Lite-Puter CX-5 - How to Load a LEARN by P1

ISO 9001 CERTIFIED
CX-5 [EUM-B] 27
( 'FNC' + '981…9' Please read Chapter 12)
STEP-3 : Press number ”2”
(now the vernier is flashing at “P 1” )
STEP-4 : Use “ + 4 ” to move the vernier to “LEARN ? ” ,and key in the “LEARN” (from
1…50) which is going to corresponded to “P 1”
(now the vernier is flashing at “P 1” )
6-4 .How to load a LEARN by ”P1…P12”(HOT KEY)
STEP-1 : Press ”LEARN”，and make sure you are in ”LEARN“
STEP-2 : Press ”FNC.”
(‘FNC’ + ‘ 981..9‘ Please read Chapter 12.)
STEP-3 : Press number ”2”
(now the vernier is flashing at “P 1” )
STEP-4 : Use “ + 4 ” to move the vernier to “LEARN 1” ,and key in the “LEARN” (from
1…50) which is going to corresponded to “P 1”
" FAVORITE LEARN "
P1 =LEARN 1
" FAVORITE LEARN "
P1 =LEARN 1
" FAVORITE LEARN "
P1 =LEARN 12
" FAVORITE LEARN "
P 1 =LEARN 1
FUNCTION
KEYIN NUMBER