ISO 9001 CERTIFIED
CX-5 [EUM-B] 18
STEP-6 : You can insert a STEP in CHASE STEP 2 after “YES” key is pressed.
(for example, move the vernier to the “SCENE” number and press “INS.” , you had
inserted SCENE 10 into CHASE STEP 3.)
STEP-7: :Move the vernier to the last CHASE STEP by “w - “ or “ + 4 ” key to revice
CHASE STEP.
CH
－－
1
。
CHS
－
0.5Sec
STEP
－－－
5,SCENE
－－
1
(For example, to increase up to CHASE STEP 5) by “w - “ or “ + 4 ” key.
STEP-8 : Make sure the vernier has been moved to the “SCENE” number , then press “ENTER”
to store the data.:
CHASE 2 : (There are 5 STEP)
STEP 1
→
SCENE 4
STEP 2
→
SCENE 3
STEP 3
→
SCENE 10 (The SCENE 10 is inserted)
STEP 4
→
SCENE 2
STEP 5
→
SCENE 1
To Next Page
Loading...
