Operating manual and inspection booklet
Camping
150 3435216
Fig. 149: Normal mode
Normal mode. If fresh water is added and you want hot
water, press "+" (the symbol is filled to the middle).
You cannot select this function if the pump is in continuous
operation mode.
Fig. 150: More hot water
More hot water. If more hot water is required, the water
temperature can be temporarily increased to approximately
65 °C. Press "+" until the symbol is completely filled (black).
The heater returns to normal operation after 30 minutes. The
circulation pump does not run during heating.
If the pump is in continuous operation mode, the system disable
the "continuous pump mode" function for 30 minutes. After this
time has elapsed, the "continuous pump mode: is reactivated.
NOTE
If you only need hot water, for example, during
summer operation when you don't need to heat, you
don't need to adjust the settings. The heating system
regulates this function automatically.
To Next Page
Loading...