Operating manual and inspection booklet
Malfunctions
200 3435216
Defective vehicle lights
The design of modern vehicle lighting systems are rather
complex. They are effectively protected against permeating
moisture and adjusted for today's traffic requirements.
Still, replacing vehicle lights require special knowledge and skills,
since improper replacement of the bulbs can change previous
settings.
WARNING
Risk of accident
Changing the settings of the vehicle's lights can lead
to severe accidents.
• If necessary, have a specialised workshop change
the light bulbs.
Additional information can be found in the applicable operation
instructions of the base vehicle's manufacturer.
Your local dealership will be happy to assist you in an fast and
efficient way. You can find an overview of the dealers with their
addresses on our homepage under the heading “Dealer search”.
Replacing the bulb of the rear lamp unit
Fig. 198: Rear lamp assembly
6. Pull the chrome strip (A) off from the rear lamp assembly
towards the rear.
Fig. 199: Remove the rear lamp assembly
7. Use a screwdriver to remove the screws (1) of the rear
lamp assembly.
8. Carefully swivel the rear lamp assembly.
To Next Page
Loading...