Operating manual and inspection booklet
Overview
3435216 93
Operation
The LT 632 uses a rotary/pressure button that is used to select
and activate switching functions by rotating or pressing the
button.
Switching the 12 V supply for the living area on and off
The rotary/pressure button is used to activate the 12 V power
supply for the living room.
Excluded are consumers that must be supplied with power
continuously while the motorhome is in use.
The following built-in devices are not activated by the operating
unit:
Elektroblock
Canopy light (optional)
Entrance light
Heater
Frost protection valve
Normal light/entrance step
"12 V ON" symbol
"Living room battery" symbol
Activation
Briefly press the rotary/pushbutton.
The '12 V ON" is illuminated – the 12 V power supply of the
living area is switched on.
NOTE
If the "12 V ON" and " Living room battery" symbols
are flashing three times and then extinguish, the
system is shut down.
See next page on how to take the motor vehicle back
into service.
Switching off
Briefly press the rotary/pushbutton.
The "12 V ON" is illuminated – the 12 V power supply of the
living area is switched on.
To Next Page
Loading...