CHAPTER 7: GENERAL DESCRIPTION 61
TRYTON 107/112
2. CONNECTOR
Please read the safety precautions described at the beginning of this manual before
handling the following devices.
2.1. Description
When it is not in the barrel (for example when indexing the barrel), the pusher is lodged in the connector.
The connector block, situated to the rear of the connector, is fed by the hydraulic pump and feeds hydraulic
fluid to the guidance tube as well as advancing the pusher.
When extracting the remnant, the pusher is locked inside the connector block.
2.2. Layout of the elements
Designation Description
A Connector
B Connector block
C Nozzle
D Cam
E Locking screw
F Hydraulic fluid feed
G Proximity detector : positioning
To Next Page
Loading...
